Helena Frye
A good grip on your badminton racket can improve your game by offering better control, comfort, and confidence in each stroke. Over time, the grip of the handle can wear down due to intense practice and play, making it painful to play as your hand is vulnerable to the racket’s wooden handle. To change the grip tape on your badminton racket, you will need a new grip and some scissors. Start by removing the old grip tape and unraveling the new grip tape. Then, peel off a few inches of the protective film from the new grip tape to expose the adhesive part. Locate the flat part of your racket's grip and place the adhesive part of the new grip tape on it. Wrap the tape at an incline, depending on your dominant hand. Once you have reached the top of the handle, cut the tape diagonally and wrap the grip with the strip provided in the overgrip package.
How to change badminton racket grip tape
| Characteristics | Values |
|---|---|
| When to change grip tape | When the grip is worn down or uncomfortable |
| What you need | Racket, new grip, scissors |
| Step 1 | Remove the old grip tape and unravel it |
| Step 2 | Remove a few inches of film from the new grip tape to expose the adhesive |
| Step 3 | Place the new grip tape on the flat part of the racket, wrapping at an incline towards the left if right-handed, and towards the right if left-handed |
| Step 4 | Cut the tape diagonally at the top of the handle |
| Step 5 | Wrap the strip provided in the overgrip package around the top of the handle |
| Step 6 | Secure the grip tape with the sticker at the end |
Explore related products
What You'll Learn
Unravel the old grip tape
To unravel the old grip tape, start by removing the tape holding the grip at the top of the handle. Be careful not to tear the tape as you remove it. Depending on your preference, you can either remove only the grip tape, or you can remove everything down to the wood, exposing the naked handle. This includes removing the original grip, any plastic wrap, and the protective film that covers the adhesive part of the grip.
If you choose to remove everything, it is recommended to wrap the bare wood with clear tape or plastic wrap to make it waterproof and protect it from moisture. This will help extend the life of your racket handle.
Once you have removed the old grip tape, you can prepare to apply the new grip tape. It is important to note that you should only remove a few inches of the paper or cellophane backing of the new grip tape at a time, as exposing too much of the adhesive can make it difficult to handle.
If your grip is sticky, you may want to consider applying racquet tape to the handle before putting on the new grip. This will help to manage the stickiness and provide a better base for the new grip tape to adhere to.
Now that the old grip tape has been successfully removed, you can move on to the next step of wrapping the new grip tape around the handle.
Jump Higher at Woo Sports Resort: Basketball Edition
You may want to see also
Explore related products
Remove the tape holding the grip
To remove the tape holding the grip of a badminton racket, start by carefully pulling off the sticker at the end of the grip tape. This will help you to get a good hold on the tape. Next, begin to unravel the grip tape from the top of the handle. You can use scissors to help you with this step, but be careful not to cut the handle of the racket.
Once you have loosened the grip tape, continue to peel it away from the handle, working your way down the racket. Take care not to tear the tape as you remove it, as you want to avoid leaving sticky residue on the handle. If the grip is particularly sticky, you may need to use a product to help dissolve the adhesive.
Keep removing the tape until you have completely uncovered the handle. Be thorough and ensure that all the grip tape has been removed, as this will provide a smooth base for your new grip tape. You may wish to use a product to clean the handle and remove any remaining residue before applying your new grip tape.
If you plan to reuse the grip tape, be sure to remove it carefully so as not to damage it. Lay it flat and smooth out any creases before reapplying it to your racket.
Championship Basketball: Strategies for Success on the Court
You may want to see also
Explore related products
Peel off the new grip tape's backing
Now that you've unravelled and removed the old grip tape, it's time to prepare the new grip tape. Start by peeling off about 5-6 inches of the paper or cellophane backing from the new grip tape. This will expose the adhesive part of the tape, which will stick to the racket handle. Be careful not to peel off too much backing, as you don't want the adhesive part to get dusty or sticky before you start wrapping.
Once you have peeled off the desired length of backing, you can begin attaching the new grip tape to the racket. Align the bottom of the grip tape with the bottom of the handle, and start wrapping the tape at a slight incline. If you are left-handed, wrap the tape towards the right, and if you are right-handed, wrap it towards the left. This will ensure a comfortable grip that suits your dominant hand.
As you wrap the tape, maintain a slight tension to ensure a smooth and secure application. Take your time and be careful not to crease or tear the tape. Continue wrapping the tape around the handle, slightly overlapping each previous wrap. Make sure the tape lies flat and smooth, with no air bubbles or wrinkles.
When you reach the top of the handle, you can secure the end of the grip tape. Cut the tape diagonally, then wrap the strip provided in the overgrip package around the top of the handle to finish. This will hold the grip tape in place and provide a neat finish. Now that you've peeled off the new grip tape's backing and applied it to the racket, you're almost done!
Basketball Wives: Meghan's Return?
You may want to see also
Explore related products
Wrap the tape around the racket handle
To wrap the tape around the racket handle, start by identifying the flat part of the grip. Remove a few inches of film from the grip, exposing the adhesive part that will stick to the racket handle. If you are left-handed, start wrapping the tape towards the right. Conversely, if you are right-handed, wrap the tape towards the left.
When wrapping the tape, ensure that you pull it firmly while turning the racket. This first turn is crucial, as it will determine the aesthetics of the grip. Make sure that the bottom of the grip aligns with the bottom of the handle.
As you wrap, be mindful of the direction of the tape. It should be wrapped at an incline, depending on your dominant hand. Continue wrapping the tape until you reach the top of the handle.
Once you have reached the top of the handle, you will need to trim the grip. Cut the tape diagonally so that it sits flush against the handle.
Basketball Size Standards for Olympic Games
You may want to see also
Explore related products
Cut the tape diagonally at the handle's top
When you reach the top of the handle, you will need to trim the grip tape. Cutting the tape diagonally will ensure that it is flush with the handle when you are finished. This is important for both the look of the racket and to ensure a comfortable grip.
To cut the badminton racket grip tape diagonally at the top of the handle, you will need scissors. It is important to be careful and precise when cutting the tape. Hold the tape taut and use sharp scissors to cut it at a diagonal angle. This will create a neat, flush finish.
The exact angle of the diagonal cut will depend on your dominant hand. If you are right-handed, you will cut the tape diagonally from the top-left to the bottom-right. If you are left-handed, you will cut the tape diagonally from the top-right to the bottom-left. This will ensure that the tape is wrapped in the correct direction for your hand.
Once the tape is cut, you can continue wrapping the grip tape down the handle, ensuring that it is smooth and flush with the handle. This will provide a comfortable and secure grip for gameplay.
Understanding Basketball: 2-Point Field Goals Explained
You may want to see also
Frequently asked questions
Just like the tyres on your car, grip tapes tend to get worn down over time, making it painful to play as your hand is vulnerable to the racket's wooden handle.
You will need a new grip tape, and some scissors.
Remove the tape holding the grip at the top of the handle. Unravel and remove the old grip.
Peel off 5-6 inches of the protective film from the new grip tape. Start at the butt of the racket and wrap the tape at an incline, depending on your dominant hand. Cut the tape diagonally when you reach the top of the handle.
Wrap the grip with the strip provided in the over-grip package. You can now resume comfortable playing!
