How Wilsonpro 70 Plus Improves Marine Cellular Signal

does wilsonpro 70 plus work on a boat

The Wilson Pro 70 Plus is a powerful signal booster that can be used in cars, trucks, RVs, and boats. It is a professional-grade, all-bands, multi-carrier signal booster that amplifies and improves voice calls, 2G, 3G, and 4G LTE data on all US and Canadian carriers. The Pro 70 Plus features a self-optimizing microprocessor with a built-in graphical signal meter, making it easy to determine the direction of the cell tower and the strength of the available signal. It offers coverage of 20,000 sq feet and more and is sold as a full kit, with expansion kits available if required.

Characteristics Values
Use case Buildings and vehicles
Coverage 20,000 sq ft and more
Signal boost Up to 70 dB
Carriers All North American cellular networks
Supported networks 2G, 3G, 4G LTE, 5G
Installation Custom professional installers
Antenna options Omni, Yagi, Panel, Dome
Cable type Wilson400 Ultra Low Loss Coax Cable
Cable length 2ft, 60ft, 75ft
Power supply 120V AC Power Supply
Power output 110-240 V AC, 50-60 Hz, 20 W
Warranty 3 years

shunwild

WilsonPro 70 Plus: Coverage area

The WilsonPro 70 Plus is a powerful signal booster that can be used in large luxury homes, commercial retail premises, and large commercial buildings. It is designed to provide maximum coverage for these spaces, which often suffer from weak signals.

The Pro 70 Plus can enhance cell coverage areas up to 25,000 sq. ft. and even offers coverage of 20,000 sq. ft. and more. The actual coverage area depends on several factors, including the strength of the outside signal and the amount of cable used.

The Pro 70 Plus features a self-optimizing microprocessor with a built-in graphical signal meter. This allows for an easy determination of the direction of the cell tower and the strength of the available signal, reducing installation time.

The WilsonPro 70 Plus has the highest downlink power of any FCC-certified signal booster on the market. This means it can provide more in-building coverage than its competitors, even with a very strong outside signal.

The booster also has a higher uplink power, allowing for a stronger signal to radiate to the tower. This provides greater user capacity and an increased range from the cell site.

The WilsonPro 70 Plus is an ideal choice for large spaces that require better cellular coverage. Its powerful 70dB amplifier ensures strong and reliable connections, even in weak signal areas.

shunwild

WilsonPro 70 Plus: Installation

The WilsonPro 70 Plus is a powerful signal booster that can be used to improve cell phone signals inside a building or large area. It offers a maximum coverage of 20,000 sq feet or more and is compatible with all North American cellular networks.

Planning the Installation

Before beginning the installation, it is important to read through all the instructions and plan where each piece of equipment will be installed. Gather information such as outside signal strength, cable length, antenna gains, and cellular frequency from your service provider.

Selecting a Location for the Signal Booster

Choose a location for the signal booster that is indoors, close to a power source, and away from excessive heat, direct sunlight, and moisture. Ensure there is proper ventilation to keep the amplifier cool.

Installing the Outside Antenna

Select a location on the roof of the building with the strongest signal from the cell tower. Use a cell phone in test mode to find the optimal location. The outside antenna cable will need to be run to the signal booster and attached to the connector labelled "Outside Antenna".

Installing the Inside Antenna

Choose a central location for the inside antenna, where the signal needs to be amplified. The separation distance between the inside and outside antennas must be a minimum of 50 feet. Run the cable from the inside antenna to the signal booster and attach it to the connector labelled "Inside Antenna".

Verifying Connections

Before powering up the signal booster, verify that both the outside and inside antennas are connected and that all connections are tight. It is also recommended to use a lightning surge protector, especially if you are in an area with frequent lightning.

Powering Up the Signal Booster

Plug the power supply into the signal booster input marked "6V DC" and then into a wall outlet. If the signal booster has a red light or a blinking red light, refer to the troubleshooting tips in the manual.

Adjusting Gain Control

If you know that only one frequency band is available or will be used, reduce the gain control on the other frequency band to the minimum. This will reduce power consumption.

Troubleshooting

The signal booster lights will indicate if it is operating properly, experiencing receiver overload, or has shut down to prevent an oscillation. If the red light is blinking, reposition the outside antenna or adjust the gain control. If the red light is solid, move the antennas farther apart or reduce the gain of the booster.

shunwild

WilsonPro 70 Plus: Compatibility

The WilsonPro 70 Plus is a powerful signal booster that can be used in buildings and vehicles, including cars, trucks, and RVs. It is designed to boost cell phone signals and improve voice calls, 2G, 3G, and 4G LTE data on all US and Canadian carriers. It is also 5G-ready and will work for the next decade and beyond.

The device is compatible with all North American cellular networks and is FCC and Industry Canada certified. It offers a coverage area of up to 20,000 sq feet and comes with a three-year warranty.

The WilsonPro 70 Plus has two versions: the 50 Ohm and the 75 Ohm. The 50-ohm version is suitable for long cable runs and comes with N-Male connectors. The 75-ohm version uses RG11 coaxial cable, which has lower signal loss than RG-6 cable.

The WilsonPro 70 Plus kit includes the amplifier, an outside antenna (either the Yagi directional antenna or the Omni directional antenna), inside antennas (either the dome or panel antennas), cables, a lightning surge protector, and an AC power supply.

The Yagi directional antenna needs to be pointed towards the nearest cell tower for the best results, while the Omni-directional antenna receives signals from all directions. The dome antenna can only be mounted on the ceiling, while the panel antenna can be mounted on the wall or ceiling or laid face down on the floor of an attic or space above the ceiling.

The WilsonPro 70 Plus is ideal for large luxury homes or commercial retail premises with signal issues. It provides strong and reliable connections, faster data services, and enhanced indoor coverage.

shunwild

WilsonPro 70 Plus: Features

The WilsonPro 70 Plus is a powerful signal booster that can be used in large luxury homes, small offices, and large commercial retail spaces. It boosts cell phone signals inside buildings or large areas, providing maximum coverage of up to 20,000 sq feet. The device is compatible with all North American cellular networks and supports 2G, 3G, 4G LTE, and 5G technology.

The WilsonPro 70 Plus features a self-optimising microprocessor with a built-in graphical signal meter. This allows for easy determination of the direction of the cell tower and the strength of the available signal, reducing installation time. The uplink and downlink power display is a new feature that simplifies installation. The high downlink power enables maximum indoor coverage in areas of strong outside signals.

The WilsonPro 70 Plus has a maximum gain of 70 dB, which is typical for commercial boosters. It has a 22.2 dBm average across all bands and a 10.4 dBm average across all downlink bands. This gives it over ten times more downlink power than the WilsonPro 70, allowing it to handle a larger number of users.

The WilsonPro 70 Plus features an LCD display panel, which allows users to cycle through the four cellular bands received by the amplifier to verify that each is functioning properly. The amplifier uses N connectors, which are found in most commercial-grade systems. The system also includes a lightning protector and high-performance cables and components.

The WilsonPro 70 Plus has two options for outside antennas: the Yagi Outside Antenna and the Omni Antenna. The Yagi antenna has 10 dB of gain and must be aimed in the direction of the cell tower. The Omni Antenna is omnidirectional and receives signals from all directions. It is made of UV-resistant PVC and is fully weatherproof.

For inside antennas, the WilsonPro 70 Plus offers two options: the Panel Inside Antenna and the Dome Inside Antenna. The Panel antenna has 10 dB of gain and is typically mounted on the ceiling, while the Dome antenna has 5 dB of gain and can only be mounted on a ceiling.

shunwild

WilsonPro 70 Plus: Alternative products

The WilsonPro 70 Plus has been discontinued by the manufacturer, but there are alternative products available.

The WilsonPro 70 Plus has been replaced by the weBoost Office 100, which is available from Waveform, the leading online distributor of WilsonPro products.

Other alternative products include:

  • The WilsonPro 1100: This was introduced by Wilson Electronics when they retired the WilsonPro 70.
  • The Netgear Nighthawk M6: A 4G LTE/5G hotspot, gateway or modem.
  • The Wilson Electronics Pro 70 Plus 50 Ohm kit: This comes with a choice of two outside antennas, the 314411 multi-band yagi antenna and the 304422 Wideband Outdoor Omni Antenna.

Frequently asked questions

The WilsonPro 70 Plus is designed for buildings and vehicles, and there is no mention of boats in the product description. Therefore, it is not recommended to use this device on a boat.

The WilsonPro 70 Plus is a signal booster that amplifies weak cellular signals to provide better voice and data coverage for phones and cellular devices.

The device uses an outside antenna to detect and collect existing cell signals. It then boosts this signal and broadcasts it indoors through inside antennas, improving the signal for users.

The coverage area depends on the existing outside signal strength. If there is a strong 5-bar signal outdoors, the WilsonPro 70 Plus can provide up to 7,500 sq ft of boosted signal. With a weaker signal, the coverage area will be reduced.

The WilsonPro 70 Plus receives power from a standard 120-volt wall outlet.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment