Amanda Knapp
Converse shoes are a popular choice for basketball players, but how you tie your laces can make a big difference in terms of comfort and style. There are several ways to tie your Converse, from the standard criss-cross lacing to more creative methods like bar lacing or using two laces in the same eyelets for a pop of colour. You can also adjust the tightness of your laces to achieve a looser or tighter fit, or even wrap the laces around your ankles for added support. Ultimately, the best way to tie your Converse for basketball depends on your personal preference and style.
| Characteristics | Values |
|---|---|
| Step 1 | Pull the laces up through the bottom eyelets |
| Step 2 | Insert one lace down into the third eyelet from the bottom on the opposite side, skipping one eyelet |
| Step 3 | Pull the same lace through the second eyelet from the top on the opposite side, repeating the pattern until reaching the top |
| Step 4 | Weave the other lace under and over the first lace, inserting it into the opposite eyelet, third from the top |
| Step 5 | Continue the pattern until reaching the top, then tie a traditional bow or tuck the laces into the shoe |
| Variation | Skip an eyelet or two to create different styles |
| Variation | Thread the laces through the eyelets, finishing with a bow behind the tongue, and tucking the ends within the collar |
| Variation | Tie the laces once around the calf for a secure hold |
| Variation | Tuck one-color shoelace into the top of the shoe and tie the other color in the front for easier bow-tying |
| Variation | For a loose fit, avoid pulling the laces too tight and leave some slack |
Explore related products
What You'll Learn
Criss-cross lacing
The criss-cross lacing method is the fastest and simplest way to lace up your Converse shoes, ensuring a classic and comfortable fit. It is also the most common method of lacing normal shoes and boots.
To begin, place your shoe in front of you with the toe facing away from you. Thread your lace through the two eyelets closest to the toe of the shoe, and pull until the lace is an even length on both sides. Then, take the right end of the lace and pass it through the next eyelet up on the left side. After that, take the left end of the lace and pass it through the next eyelet up on the right side. Keep repeating this pattern until there are no more empty eyelets.
If you want your shoes to fit loosely, avoid pulling the laces too tightly. Instead, leave some slack as you work your way up. Once you reach the top pair of eyelets, pull the two ends together to create a horizontal pathway, similar to the one at the bottom. Finally, tie the two laces in a bow to secure your feet inside your shoes.
You can also tuck the laces underneath the tongue or the sole of the shoe if you prefer a cleaner look.
Socon Basketball Tournament: Champion Revealed
You may want to see also
Explore related products
Lattice weave
To start, put your laces straight across on the inside and out through the bottom-most eyelets. Cross the laces over each other on the outside, and then go back into the set of eyelets two rows up. Keep the rhythm going by crossing two rows up on the outside, and then step one row back on the inside. Feed the ends under the sides, breaking out through the top eyelets.
Another way to do the lattice weave is to thread your lace through the two bottom eyelets. Make sure they are threaded underneath the eyelets, not above them. Take lace "A" and thread it through the fourth eyelet from the bottom on the left-hand side, crossing it across the sneaker tongue to do so. Then, take lace "A" and feed it through the next eyelet up. Repeat the pattern by threading the lace from eyelet to eyelet on each side. This should create a zig-zag effect. Once you reach the bottom eyelet on the left-hand side, stop there. Take the lace and thread it back over and through the eyelet on the right-hand side to create a nice finish.
You can also try a variation of the lattice weave by following these steps:
- Start with the lacing running through the bottom and out through the eyelets in a straight line.
- Run the shoelace into the opposite eyelet up by three.
- Pull the lace inside and go under and out through the next eyelet.
- Go diagonally down three eyelets and go inside and under through the next eyelet up.
- Go diagonally up three, this time bringing the lace out of the top eyelet.
- From the bottom of the opposite end, take the lace over and under. Then, feed it through the eyelets that are three up.
- From this position, feed the lace under the next eyelet up.
- Now, weave through the other laces by going under, then over, and then under again.
Big Ten Men's Basketball: Overhyped or Underrated?
You may want to see also
Explore related products
Bar lacing
Start by going straight across the two bottom eyelets from the outside to the inside. This will create the first horizontal bar. Take the left lace end and slide it up inside, letting it rest straight across on the other side. Now you should have two straight bars.
Continue the pattern by bringing both laces up and skipping an eyelet, emerging two eyelets up. Cross the laces over each other and continue up to the next set of eyelets. Repeat this process, threading horizontally across the shoe to form more parallel bars. Remember to alternate sides and continue the pattern until the lacing is complete.
It is important to note that straight bar lacing works best on shoes with an even number of eyelet pairs. If your shoes have an odd number of eyelet pairs, you can try some workarounds, such as tucking the ends into the shoe diagonally across from each other at the top eyelets or using lace anchors to secure the ends.
Basketball Shot Drink: What's in the Secret Recipe?
You may want to see also
Explore related products
Wrapping laces around the ankle
Wrapping your laces around your ankle is a great way to secure your Converse for basketball. This method provides a great hold and ensures your shoes remain firmly on your feet during play.
To begin, you will need to lace your Converse as normal, leaving two holes or eyelets at the top. This will give you enough lace length to wrap around your ankle. Once you have laced up, you can start to wrap the laces around your ankle. Cross the laces over each other on the outside of your ankle, ensuring they are not too tight. You want a secure fit, but you also need to be able to move comfortably.
The next step is to bring the laces back to the inside of the shoe. You can do this by crossing them underneath the ankle, or by bringing them around the back of your ankle, whichever feels most comfortable for you. Once the laces are on the inside, you can then tie them as normal, creating a standard shoelace bow.
This method of lacing is a secure and comfortable way to wear your Converse for basketball. It ensures your shoes remain on your feet and provides a snug fit. You can adjust the tightness to your preference, but remember to leave a little slack to allow for comfortable movement.
Puma Basketball Shoes: Are They Worth the Hype?
You may want to see also
Explore related products
Skipping eyelets
There are several ways to tie your Converse shoes for basketball while skipping eyelets. Here are some methods:
The Zig-Zag
This method involves creating a zig-zag pattern by skipping eyelets as you lace up. Start by pulling the laces straight across the bottom eyelets from outside to inside. Then, take the left lace and slide it up inside, letting it rest straight across on the other side. Now, both laces will move straight up on the inside, skipping an eyelet and emerging two eyelets up. Continue this pattern: go up, cross over, and reach the top of your shoe. Finally, loop the ends of your laces around your ankle and through the topmost eyelet, wrapping around your ankle once more before securing with your preferred knot.
The Lattice Weave
This style creates a lattice pattern by crossing laces on the outside and inside of the eyelets. Start by feeding your laces straight across on the inside and out through the bottom eyelets. Cross the laces over each other on the outside, and then bring them back into the set of eyelets two rows up. Keep this rhythm going by crossing two rows up on the outside and then stepping one row back on the inside. Finish by feeding the ends under the sides, emerging through the top eyelets.
The Skip-A-Space
This technique involves skipping every other eyelet as you lace up. Start by pulling your laces up through the bottom eyelets. Take one lace and insert it down into the third eyelet from the bottom on the opposite side, skipping the second eyelet. Pull the same lace up through the second eyelet from the top on the opposite side, continuing this pattern until you reach the top. Take the other lace and weave it under and over the first lace, inserting it into the opposite eyelet, third from the top. Finish by tying the laces together at the top or tucking them behind the tongue of the shoe for a cleaner look.
The Slip-On
If you want to avoid tying laces altogether, you can use no-tie shoelaces, which turn your Converse into slip-ons. These laces are stretchable and tighten with a spring-loaded lock, providing a snug and comfortable fit. They connect each pair of eyelets independently, allowing you to customize the tension for different parts of your foot. Simply thread them through the eyelets following the included instructions, adjust the tightness, and lock them in place without any knots.
Understanding Varsity Basketball Quarter Durations
You may want to see also
Frequently asked questions
To lace Converse in the standard way, thread the laces through the eyelets in a criss-cross pattern, starting from the bottom eyelets. Then, tie the laces in a bow at the top.
If you want your Converse shoes to fit loosely, do not pull the laces too tight. Leave some slack as you move upwards, and tie a bow at the top pair of eyelets.
To make your Converse shoes more secure, you can try wrapping the laces around your ankles, leaving two holes at the top. Alternatively, you can tie the laces tightly behind your calf for a firm hold.
