Kristian Ferrell
Whether you're a basketball player or a fan, knowing how to tie your shorts' waistband is essential. While it may seem straightforward, there are different ways to tie a secure knot to ensure your shorts stay up during a game or intense activity. This skill is especially useful when you encounter the dreaded greedy laundry gnomes that steal your clothes mid-day, leaving you with a missing string. Tying a waistband properly can also help prevent your shorts from being pulled down inadvertently during a deliberate foul. So, whether you're a rookie or a seasoned player, read on to learn the art of tying basketball shorts' waistbands like a pro.
Explore related products
$23.99 $35.99
What You'll Learn
Tying a simple knot
First, ensure your basketball shorts have a continuous loop drawstring. This is a single string forming a loop within the waistband. If your shorts have a 2-string drawstring, you can tie a simple shoelace knot, or a "taut line hitch" knot, which is easier to adjust.
Now, pull the full loop of the drawstring out in front of you, away from your body. Grab the middle of both sides of the loop and pull them apart and towards your body, keeping it close to the waistband. This will create two separate loops.
Cross the right loop over the left one. Then, fold the underneath (left) loop up and bring it in between the outside gap of the top (right) loop. This movement is similar to the "under, over, through, and pull" technique used in tying shoelaces.
At this point, you should have created a single knot. You can now tighten the knot by pulling on the ends of the loops. Adjust the tightness of the waistband by sliding the knot up and down the drawstring.
Finally, tuck the drawstring back into the waistband, leaving enough slack to easily access the knot and adjust it as needed.
And that's it! You have now tied a simple knot to secure your basketball shorts waistband.
Badminton's Single-Elimination Olympics: Who Will Be Crowned Champion?
You may want to see also
Explore related products
$14.99 $19.99
$19.99 $26.99
$12.74 $17.6
Creating a figure-eight loop
To create a figure-eight loop when tying your basketball shorts' waistband, start by pulling out the full loop in front of you, away from your body. Then, grab the middle of both sides and pull them simultaneously apart and towards your body, keeping it close to your waistband. This will give you two separate loops. Cross the right loop over the left one. Now, take the bottom loop and fold it up and through the outside gap of the top loop, closest to your body.
At this point, you should have a single loop projecting out of the bottom of a knot that resembles a figure eight. To secure the waistband further, you can tug on the end of the left-hand string to eliminate any slack and create a snug wrap around the right-hand string. You should now see three snug, side-by-side wraps. Maintain a taut hold on the right-hand string and pinch these wraps together with your left hand. Finally, slide the knot towards your waistband to cinch the drawstring.
If you prefer not to have a continuous loop, you can cut the drawstring and make two regular knots at each end to prevent the string from slipping back into the waistband.
Setting Up a Screen: Basketball Tactics 101
You may want to see also
Explore related products
Using a single loop drawstring
To tie a single loop drawstring on your basketball shorts, first, pull the full loop out in front of you. Then, grab the middle of both sides and pull them apart and towards your body, keeping it close to your waistband. You should now have two separate loops. Cross the right loop over the left, then fold the bottom loop up and between the outside gap of the top loop.
Now, you can create a simple knot by doing the traditional "under, over, through, and pull" manoeuvre. You can also tie a "taut line hitch" knot, which makes it easier to loosen and tighten the drawstring as needed. To do this, use your fingers to shape the loop into two separate sections. Then, pull the strings taut and cross them to make an "X" shape. Pull the left string behind the right and wrap it around several times. Create another "X" with the strings 1.5 inches (3.8 cm) in front of the first "X". Bring the left string through the new loop and pull it tight to tighten the knot.
If you want maximum security and don't want to cut the loop, you can make an inline figure-eight loop. Make two loops in the drawstring, push one partially through the other, and flip the end of the partially inserted loop over the doubled loops. Pull the knot tight so that it resembles a figure eight with a loop projecting out of its bottom.
Finally, remember to tie a knot at the end of each half of the drawstring to prevent it from slipping back into the waistband.
Sindhu's Badminton Racket: Unlocking Her Success
You may want to see also
Explore related products
$29.99 $38.99
$28.99 $39.99
Making a shoelace knot
To make a shoelace knot for a basketball shorts waistband, follow these steps:
- Start by folding down the top of the waistband.
- Pull each end of the drawstring until the shorts fit comfortably around your waist.
- Create two loops with the drawstrings and cross them, making an "X" shape.
- Pull the left string behind and wrap it around the right string several times.
- Create another "X" with the strings about 1.5 inches (3.8 cm) in front of the first "X."
- Bring the left string through the new loop and pull it tight to secure the knot.
- Adjust the tightness of the waistband by sliding the knot along the right string.
You can also try a different method by following these steps:
- Hold each string about 6-8 inches (15-20 cm) from where they emerge from the waistband.
- Feed the left-hand string into the triangular opening near the waistband and pull it through.
- Maintain tension on the right-hand string.
- Wrap the left-hand string around and back into the triangular opening, going under and then over the right-hand string.
- Pull the loops snug and make an inline figure-eight loop for added security.
- Push one loop partially through the other and flip the end of the partially inserted loop over the doubled loops.
- Pull the knot tight, creating a figure-eight shape with a loop projecting out of its bottom.
These methods will help you tie a secure and adjustable knot for your basketball shorts waistband.
Basketball and Volleyball: Similarities in Court Sports
You may want to see also
Explore related products
$19.1 $23.88
$25.99 $32.99
Adjusting the tightness
To adjust the tightness of your basketball shorts, you can use a variety of methods, depending on your preference and the type of drawstring you have.
If your shorts have a single-loop drawstring, you can adjust the tightness by first creating two separate loops. Then, cross the right loop over the left, and fold the underneath loop up and between the outside gap of the top loop. This will create a secure knot, and you can adjust the tightness by pulling on the loops.
Alternatively, you can use the "around the tree trunk" or "bunny ears" technique to tie a simple shoelace knot. To do this, make a single loop with the drawstring and then follow the "under, over, through, and pull" steps to complete the knot. You can then adjust the tightness by sliding the knot up and down the string.
If you have a two-string drawstring, you can tie a simple shoelace knot by crossing the strings to make an "X". Then, pull the left string behind and around the right string several times, creating another "X" with a gap in the middle. Bring the left string through the new loop and pull it tight. To adjust the tightness, slide the knot along the string.
For maximum security, you can also tie an inline figure-eight knot. First, make two loops in the drawstring and push one partially through the other. Then, flip the end of the partially inserted loop over the doubled loops and pull the knot tight.
Clemson's Basketball National Championship Legacy
You may want to see also
