Helena Frye
Basketball shorts with broken or missing drawstrings can be easily fixed without having to buy a new pair. All you need is some string, a safety pin, and a needle-like object such as a skewer, chopstick, knitting needle, pencil, or straw. Tape the string to the needle-like object and pull it through, scrunching the fabric around the object until the string comes out the other side. Tie off the ends of the string or seal them with an aglet, and you're done!
Explore related products
$18.99 $25.99
$9.49 $12.99
What You'll Learn
Use a safety pin to feed the new string through
Restringing basketball shorts is a quick and easy fix that can save you money and extend the life of your favourite pair of athletic wear. To restring your basketball shorts, you will need a drawstring, a safety pin, and a pair of scissors.
Firstly, remove the old drawstring from your basketball shorts. Start by locating the opening in the waistband where the drawstring comes out. Use your fingers to feel for the end of the drawstring and then gently pull it out of the waistband.
Now, take one end of the new drawstring and attach the safety pin to it. Make sure the pin goes through the string twice. Close the pin. Then, carefully guide the safety pin through the waistband, using a gentle back-and-forth motion to help thread the drawstring through the opening. Continue this process until the drawstring has been completely threaded through the waistband and comes out the other side.
Once the new drawstring is in place, secure it to prevent it from coming loose in the future. Tie a small knot at each end of the drawstring to ensure that it stays in place. You can also use the scissors to trim any excess length from the drawstring if needed.
Houston Triumphs Over Baylor in Basketball Battle
You may want to see also
Explore related products
$25.99 $29.99
$25.98 $42.99
$23.99 $35.99
Tape the string to a pencil and pull it through
Fixing a broken drawstring on your basketball shorts can be a simple task. All you need is some tape, a pencil, and your new string.
Firstly, you'll want to measure out the new string. Start at one point and move your hand down the area where the string will go, keeping some extra string to work with. Tape one end of the string to the pencil. Make sure it's secure so that the string doesn't fall off midway through the process.
Now, feed the pencil through one of the holes in the waistband of your shorts. Scrunch the fabric around the pencil and push it through to the other side. You can also use a straw, a chopstick, or a knitting needle for this step.
Once the pencil comes out of the other side, remove it from the string. Tie a knot at each end of the string to ensure it stays in place. You can also seal the ends with an aglet for a more professional finish.
Basketball and African Americans: A Cultural Perspective
You may want to see also
Explore related products
$28.99 $35.99
$19.99 $24.99
Seal the end of the string with an aglet
If you're looking to fix the drawstring on your basketball shorts, sealing the end of the string with an aglet will give it a professional finish. Aglets are the plastic or metal coverings at the ends of shoelaces, drawstrings, and other types of string.
There are several methods you can use to create an aglet. One of the simplest ways is to wrap adhesive tape two or three times around the end of the string. You can combine this with glue for added security. If you don't have glue, you can also use a small amount of wax or resin. Drip it onto the end of the string and then roll it between your fingers while it's still warm to shape it.
For a more durable option, soak the end of the string with general-purpose glue or several coats of nail polish. Alternatively, you can use heat shrink tubing, which is normally used to insulate electrical joins. This will give you a neat and slightly flexible aglet.
If you're looking for an even stronger aglet, you can bind the end of the string with thread and glue. This method, known as "whipping," is often used on larger ropes.
Keep in mind that if you're simply looking to replace the drawstring in your basketball shorts, you can use a safety pin, knitting needle, pencil, or even a straw to feed the new string through.
Adidas' Division 1 Basketball School Contracts: Who's on the List?
You may want to see also
Explore related products
Use a straw to guide the string through
If you want to fix the string on your basketball shorts, one method you can use is a straw. This is a quick and easy way to get your shorts back in action. Here is a step-by-step guide on how to do it:
Firstly, you need to prepare the string and the straw. Take your new string and feed one end of it into the straw, pushing it about 2-5 cm inside. You can then staple the string to the straw, or, if you don't want to use a staple, tape will also work. Make sure the string is securely fastened to the straw so it doesn't come loose as you feed it through.
Now you are ready to start feeding the straw and string through the waistband of your shorts. Push the straw, with the string attached, through one of the eyelets in the waistband. Keep pushing it through until it comes out the other side. As you do this, the string will be pulled through with the straw, so you are essentially using the straw to guide the string.
Once the straw and string are through to the other side, you can remove the straw, leaving the new string in place. Simply separate the straw and string, and then tie knots at each end of the string to secure it. Make sure these knots are larger than the eyelets so the string doesn't slip back through. And that's it! Your basketball shorts are now restrung and ready to wear.
This method is a great, simple way to fix your basketball shorts, and it only takes a couple of minutes. It's a useful technique to know, especially if you don't have a safety pin or other tools to hand.
Overtime in Basketball: How Long Does It Last?
You may want to see also
Explore related products
$19.99 $29.99
Tape the string to a knitting needle and feed it through
Fixing the string on your basketball shorts can be a simple task. One effective method is to use a knitting needle, which can guide the new string through the waistband.
Firstly, you will need to prepare the knitting needle by taping the string to it. Take the new string and tape the first inch or two alongside the needle. You can use any type of tape, but something strong like Scotch tape will ensure the string stays in place as you feed it through.
Now you are ready to begin feeding the string through the waistband. Insert the knitting needle into the waistband and push it through, scrunching the fabric around the needle if necessary. Guide the needle all the way through to the other side, pulling the attached string behind it.
Once you have fed the string through, you can remove the tape and detach the string from the knitting needle. You now have a new string in place and have avoided having to buy a new pair of shorts!
This method is a quick and easy way to replace the string in your basketball shorts. It is a useful technique to know, as it can save time and money, and you can apply it to other garments with drawstrings, such as hoodies or sweatpants.
Who Dominates Division 1 Basketball Wins?
You may want to see also
Frequently asked questions
You will need a skewer, chopstick, safety pin, knitting needle, pencil, straw, or any other needle-like object. Additionally, have some tape ready and, optionally, scissors.
Tape the string to the pointed object of your choice. Then, feed the taped end through the hole in the shorts. Scrunch the shorts around the object until the string comes out the other end.
In the absence of tape, you can use a straw. Put the string through the straw, tie it at the end, and then push the shorts along the straw until the string comes out the other end.
Yes, a few. Firstly, if using a safety pin, opt for a larger one as it will be quicker. Secondly, if you want a professional finish, seal off the ends of the new string with an aglet. Finally, buy a neutral-colored string so that it matches most shorts.
To prevent the string from escaping into the fabric, remember to tie the ends properly with bigger knots.
