Saoirse Downs
Spalding's Neverflat basketballs are designed to stay inflated for longer than your average ball, with the manufacturer guaranteeing one year without going flat. However, if your ball has lost some air, there are a few things you can do to add air and get it back to its optimal performance level. Firstly, it's important to warm up the ball, as the air temperature can affect the air pressure inside the ball. If it has been stored in a cold place, try dribbling it until it warms up and returns to its normal shape. If warming up the ball doesn't help, you may need to add more air. To do this, you can use a small pump designed for basketballs or bicycles, being careful not to use too much force when inserting the pump needle to avoid puncturing the ball.
| Characteristics | Values |
|---|---|
| Warming up the ball | Spalding Neverflat balls won't lose as much air as a normal basketball, but they can deflate a little in cold weather. |
| Warranty | Spalding basketballs are covered by a limited warranty for one year after purchase. Pumping a Neverflat ball will break the warranty. |
| Inflation method | Choose a small pump designed for basketballs or bicycles. Avoid high-pressure pumps designed for car tires, as they can damage the basketball. |
| Inflation process | Expose the hole underneath the black rubber cap, attach the air pump needle, and screw it in until it is firmly attached. Be careful not to puncture the basketball. Pump the ball two or three times, then quickly remove the needle to prevent air from escaping. |
| Inflation frequency | Spalding Neverflat basketballs are injected with NitroFlate molecules to stay inflated for longer than average. However, they may still need occasional pumping, especially after the first year. |
Explore related products
What You'll Learn
Warm up the ball
Spalding Neverflat basketballs are designed to stay inflated for longer than your average ball. They are injected with NitroFlate molecules, which help them retain air for up to one year. However, they may still lose some air in cold weather. If you store your basketball outside or in a cold garage, it may feel flat when you bring it out to play.
In this case, you can try warming up the ball to get it back to its optimal air pressure without having to pump it. Simply dribble the ball until it feels like it has warmed up. This will cause the air inside the ball to expand and increase the pressure, bringing it back to its normal level.
If you find that your ball is consistently losing air and warming it up doesn't help, there may be a leak. In this case, you can try to locate the leak and patch it, or you may need to take advantage of the warranty if your ball is less than a year old. Spalding offers a limited warranty on their basketballs for one year after purchase, so you may be eligible for a refund or replacement.
Additionally, it's important to note that pumping the ball will break the warranty. So, if you do need to pump your Neverflat basketball, make sure the warranty has expired or doesn't apply. You can then pump it gently, just like you would with any other basketball, being careful not to overinflate it.
Will McKee: Rising Star of Basketball
You may want to see also
Explore related products
Check the warranty
Spalding Neverflat basketballs are covered by a limited warranty for one year after purchase. This means that the manufacturer guarantees that the ball will not go flat within a year. If your basketball has lost air and there is no obvious sign of damage, you can request a refund or replacement from Spalding. To do this, you will need to provide proof of purchase and may need to send the basketball back to the company.
It is important to note that pumping a Neverflat ball will break the warranty. Spalding assumes no responsibility or liability for any damages or defects due to negligence, abuse, misuse, non-basketball activities, hanging, vandalism, acts of nature, improper installation, or failure to follow maintenance guidelines in the owner's manual. Any modifications made to the product will also void the warranty.
If you believe your basketball has a defect, you can submit a warranty claim to Spalding. There are two ways to do this: you can call 1-800-SPALDING (a USA phone number) and ask for a return authorization, or you can send the basketball and sales slip to Spalding Consumer Relations at the following address: Spalding Consumer Relations / One Fruit of the Loom Drive / Bowling Green, KY 42103. Be sure to include your name, address, telephone number, and a description of the defect.
Spalding aims to respond to warranty claim submissions within 3-5 business days and to ship any approved warranty claim products within the same timeframe. During peak season or due to other circumstances, this timing may be longer. If your claim is approved, Spalding will replace the product free of charge. If the product is no longer available, they will refund your original purchase price.
Understanding High School Basketball Rankings: A Guide
You may want to see also
Explore related products
Choose a small pump
When choosing a small pump to inflate your Spalding Neverflat Basketball, there are a few things to consider. Firstly, it is important to choose a pump that is compatible with the basketball's needle. The needle is used to connect the pump to the basketball, so ensure the pump you choose comes with a compatible needle attachment or that you have a separate needle that fits both the pump and the basketball.
Secondly, look for a pump with a pressure gauge. Inflating a basketball to the correct pressure is crucial as it affects the ball's performance, including its bounce and grip. The recommended pressure for most basketballs, including Spalding Neverflat Basketballs, is around 8 psi (pounds per square inch). A pump with a pressure gauge will allow you to monitor the pressure during inflation and ensure you don't over-inflate the ball, which can damage its integrity and affect its performance.
Additionally, consider the size and portability of the pump. If you need to inflate your basketball on the go, such as at a basketball court or during travel, choose a small, portable pump that is easy to carry and store. Some pumps are designed specifically for sports balls and come with convenient carrying cases or attachments that make them easy to take with you.
You may also want to consider the pump's power source. Some pumps are manual, requiring you to pump by hand or foot, while others are electric or battery-operated. Electric pumps may be more convenient and faster, but manual pumps are typically more portable and cost-effective.
Finally, read reviews and compare prices to find a pump that fits your budget and has a good reputation. Look for a pump that is durable, easy to use, and accurate in terms of pressure measurement and inflation.
Injury Rates: Football vs. Basketball
You may want to see also
Explore related products
Attach the air pump needle
To attach the air pump needle, first locate the small needle that should have come with your air pump. This needle fits onto the end of the air pump, allowing you to insert it into the tiny hole in the basketball. Screw the needle firmly onto the pump, ensuring it is securely attached. Be careful not to use excessive force, as you may accidentally puncture the basketball. If you are having difficulty attaching the needle, you can try wetting the end with a small amount of saliva or glycerin. Now that the needle is attached, you can proceed to inflate your Spalding Neverflat basketball.
It is important to note that if you are using a bicycle pump, you will need to locate the plastic tab at the end of the tube and pinch it closed before attaching the needle. This will prevent air from escaping through the tube during the inflation process. Once the needle is securely attached, you can move on to the next step of inflating your basketball.
When attaching the air pump needle, it is crucial to exercise caution. Young children should be supervised by an adult to avoid any potential injuries from the needle or accidental punctures in the basketball. Additionally, always ensure that the needle is properly secured before attempting to inflate the ball.
If you encounter any issues or difficulties during the process of attaching the air pump needle, it may be helpful to consult the instructions that came with your air pump or seek assistance from someone with experience in inflating sports equipment. Remember, it is better to take your time and ensure a secure connection rather than risk damaging your basketball or causing injury.
By carefully following these instructions, you can successfully attach the air pump needle and proceed to inflate your Spalding Neverflat basketball. Remember to handle the needle with care and ensure a secure connection to avoid any potential issues or accidents during the inflation process.
Building a Basketball Program: Strategies for Success
You may want to see also
Explore related products
Push up the basketball cap
Spalding Neverflat basketballs are designed to stay inflated for a year without the need for a pump. However, if your ball has been stored outside or in a cold garage, it may lose some air and need to be pumped up.
If your ball is under a year old, it is still under warranty and you can request a refund or replacement from Spalding. Pumping the ball yourself will break the warranty, so this should be your first step.
If your warranty has expired or you want to pump the ball yourself, you can do so by following these steps:
Once you have exposed the hole, you can attach the air pump needle. This needle should come with your air pump and fits onto the end, allowing you to attach it to the tiny hole in the basketball.
Basketball Scoring System at the Olympics Explained
You may want to see also
Frequently asked questions
If your basketball is under a year old, it is covered by a limited warranty and you should contact Spalding for a refund or replacement. If the warranty has expired, you can pump the ball as normal.
Choose a small pump designed for basketballs or bicycles. Attach the air pump needle to the pump and then to the basketball. Push up the basketball cap to expose the hole underneath and insert the needle. Pump the ball two or three times, then quickly remove the needle.
It is better to pump the ball too little than too much. Spalding Never Flat Basketballs are designed to stay inflated for one year without needing to be pumped, so they should not require much additional air.
Spalding Never Flat Basketballs are designed to stay inflated for one year. After this, they will need to be pumped occasionally, but this will depend on how often you use the ball and the conditions it is stored in.
Spalding Never Flat Basketballs are designed to retain air for longer than average balls, but they can still deflate a little in cold weather. If your ball is losing air, try storing it indoors and check for any punctures or damage.
