Setting Up Sevylor Boats: Easy Assembly Guide

Sevylor boats are inflatable kayaks and canoes that are easy to store and inflate. They are made for adventure and are known for their comfort, safety, and durability. Putting together a Sevylor boat involves inflating the boat and its components, such as the seats, and attaching any additional accessories, like a motor mount or floorboards. It is important to ensure that the boat is inflated properly and that all valves are securely closed to prevent air loss and maintain buoyancy.

How to inflate your Sevylor boat

To inflate your Sevylor boat, start by inflating the floor first and then the sides. Remember not to over-inflate it, as the air in the chambers will expand as the day gets warmer. It is also important to take the pump with you, as the air in the base will contract and cool on the water.

When inflating, remember to fit the skeg before inflating the boat, as this makes a big difference to the steering.

When deflating, do the reverse order: deflate the sides first and then the floor.

How to attach a motor to your Sevylor boat

To attach a motor to your Sevylor boat, you will need a Sevylor Motor Mount. This mount is designed to fit all Sevylor boats that are compatible with gas motors. The mount is easy to install, with a pair of secure arms that fit inside a Sevylor's attachment points.

• Purchase a Sevylor Motor Mount: The Sevylor Motor Mount is designed specifically for Sevylor boats and can be purchased online or at select retailers.
• Prepare the Motor Mount: Before attaching the mount to your boat, ensure that all the components are included and in good condition. The mount should include stainless steel support tubes, a mounting board, and secure attachment arms.
• Inflate Your Boat: Fully inflate your Sevylor boat according to the manufacturer's instructions. Ensure that the boat is properly inflated to provide a stable and secure base for the motor mount.
• Attach the Motor Mount: Position the motor mount at the rear of your Sevylor boat. Align the secure attachment arms with the corresponding attachment points on the boat. Gently push the arms into the attachment points until they are firmly in place.
• Adjust the Motor Mount: If needed, adjust the telescoping feature of the motor mount to ensure a proper fit. Make sure that the mount is secure and does not move around.
• Attach the Motor: Place your outboard motor onto the mounting board of the Sevylor Motor Mount. Secure the motor to the board using the provided clamps or other appropriate fasteners. Ensure that the motor is tightly attached to the mount.
• Test the Setup: Once the motor is attached, carefully lower your Sevylor boat into the water. Test the motor by slowly increasing the throttle to ensure it is functioning correctly.
• Enjoy Your Motorized Boat: With the motor successfully attached, you can now enjoy your Sevylor boat with the added convenience of motorized propulsion. Remember to practice safe boating and follow all local regulations.

By following these steps, you can easily attach a motor to your Sevylor boat, allowing you to explore further and enjoy your time on the water even more. Remember to refer to the specific instructions provided with your Sevylor Motor Mount and boat for the most accurate and up-to-date information.

How to protect your Sevylor boat from the sun

The sun can be just as harmful to your boat as it is to your skin. Here are some tips to protect your boat from sun damage:

Use a Boat Cover

If you're not using your boat, cover it! Boat covers come in all shapes and sizes, so you can find one that fits your boat perfectly. This will protect your boat from the sun's UV rays and keep it looking new. If you plan to store your boat for several months, consider shrink-wrapping it for added protection from UV exposure.

Store Your Boat in a Shaded Area

If possible, store your boat indoors or in a shaded area, such as a garage or shed. This will help prevent sun damage to the exterior and interior of your boat.

Apply Boat Wax

Think of boat wax as sunblock for your boat. It will protect your boat's hull from UV rays and keep it sparkling like new. Make sure to use a wax that is specifically designed for boats, as car wax is not strong enough. Apply the wax a few times a year, depending on how often you use your boat.

Protect Your Boat Seats

Boat seats are usually made from vinyl, which can be damaged by the sun's UV rays. To protect your seats, use boat seat covers or apply a vinyl protectant, such as wax. This will help prevent the seats from losing their colour, cracking, or becoming too hot.

Regular Cleaning and Maintenance

Clean your boat regularly to remove any dirt, grime, or chemicals that can be compromised by UV exposure. Use a basic marine soap and a soft sponge or rag to scrub the entire framework of your boat. Rinse and dry your boat before applying any wax or protectant.

How to repair your Sevylor boat

If you're the owner of a Sevylor inflatable boat, you may at some point need to repair it. Here are some tips on how to repair your Sevylor boat and get it back to its former glory.

Inspect for Damage

Begin by inspecting your boat for any damage. Look for any holes, tears, or areas of weakness in the material. Pay close attention to the seams and valves, as these are common areas for leaks. If you find any issues, make sure to address them as soon as possible to prevent further damage.

Clean the Area

Before attempting any repairs, clean the area around the damage. Use a mild soap and water solution to gently wipe down the affected area. This will help remove any dirt, debris, or residue that could interfere with the repair process. Make sure the area is completely dry before moving on to the next step.

Patching Holes and Tears

For small holes or tears, you can use a repair kit to patch them up. Sevylor offers repair kits that include adhesive and patches. Cut a patch that is slightly larger than the hole or tear, and round the corners to prevent peeling. Apply the adhesive to the patch and the area surrounding the damage, then firmly press the patch into place. Allow the adhesive to dry completely before continuing.

Replacing Valves

If you have a leak around a valve, you may need to replace it. Remove the old valve by cutting it out carefully, being careful not to damage the surrounding material. Clean the area and allow it to dry completely. Follow the instructions that come with your new valve to install it properly. Make sure to test the valve for leaks once it's installed.

Drying and Storage

After making repairs, make sure to dry your boat completely before storing it. Inflate it and leave it in a warm, dry place for at least 24 hours. This will help prevent the growth of mildew or mould, which can weaken the material over time. Proper drying and storage will help extend the life of your boat.

Preventative Maintenance

To reduce the need for repairs, perform regular maintenance on your Sevylor boat. After each use, rinse it with fresh water and dry it thoroughly. Inspect it for any damage and address any issues immediately. Store it in a cool, dry place, and avoid exposing it to extreme temperatures or direct sunlight for prolonged periods. By following these tips, you can keep your Sevylor boat in good condition and enjoy it for many outings to come.

How many people can fit in a Sevylor boat?

The capacity of a Sevylor boat depends on the model. For example, the Sevylor Super Caravelle inflatable boat can hold up to four people, or 700 pounds, while the Sevylor Fish Hunter can hold up to six people, or 990 pounds. The Fish Hunter is also available in a four-person model, which can hold up to 700 pounds.

Frequently asked questions