Wet And Forget: Reviving Boat Seats, Effective Or Not?

Wet & Forget is a cleaning product that can be used to clean boat seats. It is non-caustic, non-acidic, and contains no bleach, so it is safe for use on all boat materials, including wood, metal, gel coat, and fibreglass boats. Wet & Forget can be used to clean stained boat seats and remove mildew. It can be applied to dirty boat seating and left to dry overnight before being rinsed with water and dried the next day.

Wet & Forget is safe to use on all boat materials, including wood, metal, gel coat and fibreglass boats

To use Wet & Forget on boat seats, simply spray the product onto the stained seats and let it dry overnight. The next morning, thoroughly rinse the seats with water and dry them before use. Wet & Forget works with the water and wind to do the cleaning for you, so there's no need for scrubbing or power washing.

Wet & Forget is especially useful for removing mildew from boat seats. After several months of being stowed away, or simply from being on the water, boat seat cushions are likely to be prone to mildew. Wet & Forget can help eliminate those stains and leave your boat seats clean and fresh.

It's important to note that before applying Wet & Forget, your boat should be at least 100 ft away from a water source (lake, stream, river, etc.). Additionally, keep people and pets off interior surfaces during and after product application.

Wet & Forget is non-caustic, non-acidic and contains no bleach

Wet & Forget is an effective boat seat cleaner that can be used on all boat materials, including wood, metal, gel coat and fibreglass boats. It is non-caustic, non-acidic and contains no bleach, so it is safe to use on your boat's interior surfaces, such as seats, chairs, armrests and headrests.

To use Wet & Forget on your boat seats, simply spray Wet & Forget Ready-To-Use or your Wet & Forget Concentrate mixture onto the stained seats. Then, let the surfaces dry overnight and thoroughly rinse the seats with water the next day before use.

Wet & Forget works with the water and wind to do the cleaning for you, so no scrubbing or power washing is required. It is a simple and effective way to keep your boat seats clean and free of stains and mildew.

One happy customer, Karen V, says: "I spray it in my shower in the morning and just rinse! [...] You'll be amazed at how the soap scum is magically gone!"

Wet & Forget can be used to clean boat seat cushions, which are prone to mildew

To use Wet & Forget on boat seat cushions, simply spray Wet & Forget Ready-To-Use or your Wet & Forget Concentrate mixture onto the stained seats. Then, let the surfaces dry overnight and thoroughly rinse the seats with water the next day before use. No scrubbing or power washing is required, as Wet & Forget works with the water and wind to do the cleaning for you.

If the elements (wind and rain) aren't able to assist with removing the stain, a gentle scrub will do the trick. Wet & Forget can also be used to clean other parts of your boat, such as the hull, carpets, and almost any other interior surface.

Wet & Forget can be used to clean boat carpets

Wet & Forget is non-caustic, non-acidic, and contains no bleach so it’s safe for use on all boat materials including wood, metal, gel coat and fibreglass boats! It works with the water and wind to do the cleaning for you. No scrubbing or power washing is required.

Before applying Wet & Forget, ensure your boat is at least 100 ft away from a water source (lake, stream, river, etc). In addition, keep people and pets off interior surfaces during and after product application.

Wet & Forget can also be used to clean all deck types, including composite decks, without any scrubbing! No rinsing or scrubbing is necessary – simply apply and let the rain do the work for you.

Wet & Forget can be used to clean boat headrests and armrests

To use Wet & Forget on boat headrests and armrests, follow these steps:

• Ensure your boat is at least 100 ft away from a water source (lake, stream, river, etc.).
• Keep people and pets off the interior surfaces during and after product application.
• Apply Wet & Forget Ready-To-Use to the headrests and armrests.
• Allow the surfaces to dry overnight.
• The next morning, thoroughly rinse the headrests and armrests with water and dry them before use.

That's all you need to do! Wet & Forget works with the water and wind to do the cleaning for you, so there's no need for scrubbing or power washing. If the elements (wind and rain) aren't able to remove the stain, a gentle scrub will do the trick.

Frequently asked questions